3,4-Dimethoxy phenyl thiosemicarbazone as an effective corrosion inhibitor of copper under acidic solution: comprehensive experimental, characterization and theoretical investigations.

This study investigates the corrosion inhibition potential of 3,4-dimethoxy phenyl thiosemicarbazone (DMPTS) for copper in 1 M hydrochloric acid (HCl) solutions, aiming to disclose the mechanism behind its protective action. Through an integrative methodology encompassing electrochemical analyses-such as weight loss measurements, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS)-we quantitatively evaluate the corrosion protection efficacy of DMPTS. It was determined that the optimal concentration of DMPTS markedly boosts the corrosion resistance of copper, achieving an impressive inhibition efficiency of up to 89% at 400 ppm. The formation of a protective layer on the copper surface, a critical aspect of DMPTS's inhibitory action, was characterized using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). These techniques provided empirical evidence of surface morphology modifications and roughness changes, affirming the formation of a protective barrier against corrosion. A significant advancement in our study was the application of Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy, which identified chemical adsorption as the definitive mechanism of corrosion inhibition by DMPTS. The ATR-FTIR results explicitly demonstrated the specific interactions between DMPTS molecules and the copper surface, indicative of a robust protective adsorbed layer formation. This mechanistic insight, crucial to understanding the inhibitory process, aligns with the protective efficacy observed in electrochemical and surface analyses. Theoretical support, provided by the Quantum Theory of Atoms in Molecules (QTAIM) and quantum chemical computations, further validated the strong molecular interaction between DMPTS and copper, corroborating the experimental findings. Collectively, this research not only confirms the superior corrosion inhibition performance of DMPTS in an acidic setting but also elucidates the chemical adsorption mechanism as the foundation of its action, offering valuable insights for the development of effective corrosion inhibitors in industrial applications.

Exploring the Efficiency of Algerian Kaolinite Clay in the Adsorption of Cr(III) from Aqueous Solutions: Experimental and Computational Insights.

The current study comprehensively investigates the adsorption behavior of chromium (Cr(III)) in wastewater using Algerian kaolinite clay. The structural and textural properties of the kaolinite clay are extensively characterized through a range of analytical methods, including XRD, FTIR, SEM-EDS, XPS, laser granulometry, N2 adsorption isotherm, and TGA-DTA. The point of zero charge and zeta potential are also assessed. Chromium adsorption reached equilibrium within five minutes, achieving a maximum removal rate of 99% at pH 5. Adsorption equilibrium is modeled using the Langmuir, Freundlich, Temkin, Elovich, and Dubinin-Radushkevitch equations, with the Langmuir isotherm accurately describing the adsorption process and yielding a maximum adsorption capacity of 8.422 mg/g for Cr(III). Thermodynamic parameters suggest the spontaneous and endothermic nature of Cr(III) sorption, with an activation energy of 26.665 kJ/mol, indicating the importance of diffusion in the sorption process. Furthermore, advanced DFT computations, including COSMO-RS, molecular orbitals, IGM, RDG, and QTAIM analyses, are conducted to elucidate the nature of adsorption, revealing strong binding interactions between Cr(III) ions and the kaolinite surface. The integration of theoretical and experimental data not only enhances the understanding of Cr(III) removal using kaolinite but also demonstrates the effectiveness of this clay adsorbent for wastewater treatment. Furthermore, this study highlights the synergistic application of empirical research and computational modeling in elucidating complex adsorption processes.

Development and evaluation of a pH-responsive Mimosa pudica seed mucilage/ß- cyclodextrin-co-poly(methacrylate) hydrogel for controlled drug delivery: In vitro and in vivo assessment.

In this comprehensive investigation, a novel pH-responsive hydrogel system comprising mimosa seed mucilage (MSM), ß-cyclodextrin (ß-CD), and methacrylic acid (MAA) was developed via free radical polymerization technique to promote controlled drug delivery. The hydrogel synthesis involved strategic variations in polymer, monomer, and crosslinker content in fine-tuning its drug-release properties. The resultant hydrogel exhibited remarkable pH sensitivity, selectively liberating the model drug (Capecitabine = CAP) under basic conditions while significantly reducing release in an acidic environment. Morphological, thermal, and structural analyses proved that CAP has a porous texture, high stability, and an amorphous nature. In vitro drug release experiments showcased a sustained and controlled release profile. Optimum release (85.33 %) results were recorded over 24 h at pH 7.4 in the case of MMB9. Pharmacokinetic evaluation in healthy male rabbits confirmed bioavailability enhancement and sustained release capabilities. Furthermore, rigorous toxicity evaluations and histopathological analyses ensured the safety and biocompatibility of the hydrogel. This pH-triggered drug delivery system can be a promising carrier system for drugs involving frequent administrations.

Advancing Diabetes Management: The Future of Enzyme-Less Nanoparticle-Based Glucose Sensors-A Review.

BACKGROUND: Glucose is vital for biological processes, requiring blood sugar levels to be maintained between 3.88 and 6.1 mmol/L, especially during fasting. Elevated levels signal diabetes, a global concern affecting 537 million people, necessitating effective glucose-monitoring devices. METHOD: Enzyme-based sensors, though selective, are sensitive to environmental factors. Nonenzymatic sensors, especially those with nanoparticles, offer stability, high surface area, and cost-effectiveness. Existing literature supports their immediate glucose oxidation, showcasing exceptional sensitivity. RESULTS: This review details nonenzymatic sensors, highlighting materials, detection limits, and the promise of nanoparticle-based designs, which exhibit enhanced sensitivity and selectivity in glucose detection. CONCLUSION: Nanoparticle-based sensors, as reviewed, show potential for glucose monitoring, overcoming enzyme-based limitations. The conclusion suggests future directions for advancing these sensors, emphasizing ongoing innovation in this critical research area.

Theoretical Exploration of Enhanced Antioxidant Activity in Copper Complexes of Tetrahydroxystilbenes: Insights into Mechanisms and Molecular Interactions.

A theoretical investigation was conducted using DFT/PW91/TZP/DMSO calculations on a complete set of exhaustive lists of 18 compounds resulting from the complexation of trans-2,4,3',5'-tetrahydroxystilbene (T-OXY) and cis-2,4,1',3'-tetrahydroxystilbene (C-OXY) with copper metal cations (Cu+ and Cu2+). The ligand-binding sites are the critical points of Quantum Theory of Atoms in Molecules (QTAIM) analysis on neutral and deprotonated ligands. Various mechanisms, including hydrogen atom transfer (HAT), sequential proton loss electron transfer (SPLET), single electron transfer followed by proton transfer (SET-PT), and bond dissociation energy (BDE(E0)) calculations, were employed to quantify the antioxidant activity. The BDE(E0) mechanism emerged as the most suitable approach for such analyses to evaluate the departure of hydrogen atoms since the results show the HAT mechanism is the most likely occurring. Particularly intriguing were the anionic Cu+ complexes with ligands adopting trans configurations and deprotonated conformations, displaying superior antioxidant activity compared to their counterparts. Remarkably, a single ligand within the Cu+ complex exhibited exceptional antioxidant prowess, yielding a BDE(E0) value of 91.47 kcal/mol. Furthermore, a complex involving two deprotonated ligands demonstrated antioxidant activity of 31.12 kcal/mol, signifying its potential as a potent antiradical agent, surpassing T-OXY by a factor of 3.91 and even surpassing the antioxidant efficiency of Vitamin C.

Preparation, In Vitro Characterization, and Evaluation of Polymeric pH-Responsive Hydrogels for Controlled Drug Release.

The purpose of the current research is to formulate a smart drug delivery system for solubility enhancement and sustained release of hydrophobic drugs. Drug solubility-related challenges constitute a significant concern for formulation scientists. To address this issue, a recent study focused on developing PEG-g-poly(MAA) copolymeric nanogels to enhance the solubility of olmesartan, a poorly soluble drug. The researchers employed a free radical polymerization technique to formulate these nanogels. Nine formulations were formulated. The newly formulated nanogels underwent comprehensive tests, including physicochemical assessments, dissolution studies, solubility evaluations, toxicity investigations, and stability examinations. Fourier transform infrared (FTIR) investigations confirmed the successful encapsulation of olmesartan within the nanogels, while thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) studies verified their thermal stability. Scanning electron microscopy (SEM) images revealed the presence of pores on the surface of the nanogels, facilitating water penetration and promoting rapid drug release. Moreover, powder X-ray diffraction (PXRD) studies indicated that the prepared nanogels exhibited an amorphous structure. The nanogel carrier system led to a significant enhancement in olmesartan's solubility, achieving a remarkable 12.3-fold increase at pH 1.2 and 13.29-fold rise in phosphate buffer of pH 6.8 (NGP3). Significant swelling was observed at pH 6.8 compared to pH 1.2. Moreover, the formulated nexus is nontoxic and biocompatible and depicts considerable potential for delivery of drugs and protein as well as heat-sensitive active moieties.

Enhancing the efficiency and functionality of xylanase from Bacillus sp. RTS11: Optimization, purification, characterization, and prospects in kraft pulp bleaching.

Bacillus sp. RTS11, a xylanolytic strain, was isolated from the Algerian desert rocks. Genetic analysis revealed a remarkable 98.69% similarity to Bacillus pumilus. We harnessed optimization techniques, including Plackett-Burman screening and Box-Behnken optimization design, to amplify xylanase production and activity. The outcome of these efforts was an optimized medium that yielded an impressive xylanase production titer of 448.89 U, a threefold increase compared to the non-optimized medium (146 U). The Purification of xylanase was achieved through the three-phase partitioning technique, employing t-butanol and various chromatographic methods. Notably, anion exchange chromatography led to isolating a highly pure enzyme with a molecular weight of 60 kDa. The xylanase exhibited its peak activity at a temperature of 60°C and a pH of 9.0. When applied to pulp pretreatment, 20 U/g of xylanase demonstrated a substantial increase in the release of phenolic and chromophore compounds while reducing sugar content in the pulp. Furthermore, this versatile xylanase shows its ability to efficiently hydrolyze a variety of agro-industrial residues, including wheat bran, corn and grape waste, wheat straw, and sugarcane bagasse. These findings underscore the significant potential of this xylanase enzyme in biobleaching processes and the utilization of agro-industrial waste, opening up exciting avenues for sustainable and environmentally friendly industrial applications.

Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights.

This study investigates the efficacy of adsorbents from locally sourced olive waste-encompassing olive skins, leaves, and pits, recovered from the initial centrifugation of olives (OWP)-and a composite with sodium alginate (OWPSA) for the removal of Cu2+ ions from synthetic wastewater. Experimental analyses conducted at room temperature, with an initial Cu2+ concentration of 50 mg/L and a solid/liquid ratio of 1 g/L, showed that the removal efficiencies were approximately 79.54% and 94.54% for OWP and OWPSA, respectively, highlighting the positive impact of alginate on adsorption capacity. Utilizing statistical physics isotherm models, particularly the single-layer model coupled to real gas (SLMRG), allowed us to robustly fit the experimental data, providing insights into the adsorption mechanisms. Thermodynamic parameters affirmed the spontaneity and endothermic nature of the processes. Adsorption kinetics were interpreted effectively using the pseudo-second-order (PSO) model. Molecular modeling investigations, including the conductor-like screening model for real solvents (COSMO-RS), density functional theory (DFT), and atom-in-molecule (AIM) analysis, unveiled intricate molecular interactions among the adsorbent components-cellulose, hemicellulose, lignin, and alginate-and the pollutant Cu2+, confirming their physically interactive nature. These findings emphasize the synergistic application of experimental and theoretical approaches, providing a comprehensive understanding of copper adsorption dynamics at the molecular level. This methodology holds promise for unraveling intricate processes across various adsorbent materials in wastewater treatment applications.

Adsorption of Eosin B from Wastewater onto the Prepared Porous Anion Exchange Membrane.

This research describes the fabrication of the porous trimethylamine (TMA)-grafted anion exchange membrane (AEM) over a phase inversion process. The synthesis of the generated AEM was verified using Fourier transform infrared (FTIR) spectroscopy. The fabricated porous AEM showed 240% water uptake (WR), 1.45 mg/g ion exchange capacity (IEC), and a 9.0% linear expansion ratio (LER) at 25 °C. It exhibited a porous structure and higher thermal stability. It was utilized to remove eosin B (EB) from wastewater via the process of adsorption. The adsorption capacity of EB increased with time and the starting concentration of EB while decreasing with temperature and the AEM dosage. Adsorption isotherm investigation results showed that EB adsorption onto the porous AEM followed the Langmuir isotherm because the value of correlation coefficient (R2 = 0.992) was close to unity. Because the correlation coefficient was close to one, it was determined through adsorption kinetic experiments that the adsorption of EB on the produced porous AEM was suitable for a pseudo-second-order model. Thermodynamic study about process of EB adsorption on the porous AEM revealed that there was an exothermic (ΔH° = -16.60 kJ/mol) and spontaneous process.

In silico study of antibacterial tyrosyl-tRNA synthetase and toxicity of main phytoconstituents from three active essential oils.

The misuse and overuse of antibiotics have resulted in antibiotic resistance. However, there are alternative approaches that could either substitute antibiotics or enhance their effectiveness without harmful side effects. One such approach is the use of terpene-rich essential oils. In this study, we aimed to demonstrate the antibacterial activity of the main components of three plant essential oils, namely Anthemis punctata, Anthemis pedunculata and Daucus crinitus. Specifically, we targeted bacterial tyrosyl-tRNA synthetase, an enzyme that plays a critical role in bacterial protein synthesis. To investigate how the phytocompounds interact with the enzyme's active sites, we employed a molecular docking study using Autodock Software Tools 1.5.7. Our findings revealed that all 28 phytocompounds bound to the enzyme's active sites with binding energies ranging from -6.96 to -4.03 kcal/mol. These results suggest that terpene-rich essential oils could be a potential source of novel antimicrobial agents.Communicated by Ramaswamy H. Sarma.

Bentonite SDBS-loaded composite for methylene blue removal from wastewater: An experimental and theoretical investigation.

This study addresses the urgent need for practical solutions to industrial water contamination. Utilizing Algerian Bentonite as an adsorbent due to its regional prevalence, we focused on the efficiency of the Bentonite/Sodium dodecylbenzene sulfonate (SDBS) matrix in Methylene Blue (MB) removal. The zero-charge point and IR spectroscopy characterized the adsorbent. Acidic pH facilitated SDBS adsorption on Bentonite, achieving equilibrium in 30 min with a pseudo-second-order model. The UPAC and Freundlich model indicated a qmax of 25.97 mg/g. SDBS adsorption was exothermic at elevated temperatures. The loaded Bentonite exhibited excellent MB adsorption (pH 3-9) with PSOM kinetics. Maximum adsorption capacity using IUPAC and GILES-recommended isotherms was qmax = 23.54 mg/g. The loaded Bentonite's specific surface area was 70.01 m2/g, and the Sips model correlated well with experimental data (R2 = 0.98). This study highlights adsorption, mainly Bentonite/SDBS matrices, as a promising approach for remediating polluted areas by efficiently capturing and removing surfactants and dyes, contributing valuable insights to address industrial water contamination challenges.

Optimization and validation of a bioanalytical HPLC-UV technique for simultaneous determination of underivatized phenylalanine and tyrosine in the blood for phenylketonuria diagnosis and monitoring.

This study aimed to develop a fast, accurate, and precise high-performance liquid chromatography with UV detection method for simultaneous analysis of underivatized phenylalanine (Phe) and tyrosine (Tyr) in biological samples. Separation of the analytes was accomplished using a Discovery HS F5-3 column, which offered better retention and peak symmetry for the tested analytes. Chromatographic conditions were optimized using central composite experimental design, and three factors were investigated: the concentration of ammonium acetate (A), the acetonitrile proportion in the mobile phase (B) and the column oven temperature (C). The approach was verified using ß-expectation tolerance intervals for total error measurement that did not exceed 15%. Optimal settings were A = 50 mm, B = 24% and C = 28°C. The method applicability was determined using human plasma from 75 volunteers. The limits of detection and quantification of the technique were satisfactory at 9 and 29 µm for Phe and 4 and 13 µm for Tyr. The mean analytical bias in spiking levels was acceptable, ranging from -1.649 to +1.659% for both substances, with RSD <5% in all instances. The suggested approach was successfully used to analyze Phe and Tyr in human blood samples and calculate the Phe/Tyr ratio.

Chitosan-based intelligent polymeric networks for site-specific colon medication delivery: A comprehensive study on controlled release of diloxanide furoate and network formation dynamics.

Oral medications are prone to gastric degradation and enzymatic inactivation, diminishing their efficacy. This study investigates a solution by developing intelligent polymeric networks, incorporating chitosan, methacrylic acid, N, N, methylene bisacrylamide, and montmorillonite clay, to enable the controlled release of Diloxanide Furoate (DF), an anti-protozoal drug. Employing a swelling-assisted diffusion technique, drug loading percentages varied from 63.96 % to 76.82 % among different formulations. Increased chitosan and methacrylic acid content enhanced drug loading, while N, N, methylene bisacrylamide and montmorillonite clay demonstrated an inverse relationship affecting diffusion and swelling. Equilibrium swelling studies unveiled formulation-dependent behaviors, with chitosan reducing swelling and methacrylic acid promoting it. Higher N, N, methylene bisacrylamide concentrations decreased swelling, indicating a denser cross-linked structure, while montmorillonite clay reduced hydrophilicity and swelling capacity. Further analyses confirmed successful gel formation, particularly in formulations with higher chitosan, methacrylic acid, and N, N, methylene bisacrylamide content, while montmorillonite clay limited gel fraction due to restricted polymer chain mobility. Techniques such as Fourier transform infrared spectroscopy, Differential scanning calorimetry, and thermal gravimetric analyses supported network development, enhancing thermal stability and cross-linking density. This research underscores the flexibility of polymeric networks for precise drug delivery, offering potential advancements in targeted therapies for various medical conditions.

Sustainable and Green Corrosion Inhibition of Mild Steel: Insights from Electrochemical and Computational Approaches.

Natural and fragrant compounds, essential oils (EOs) extracted from plants through hydrodistillation, are gaining popularity as eco-friendly and sustainable agents to protect metals and alloys from corrosion in acidic environments. This research focused on extracting and characterizing an EO obtained from the Cuminum cyminum (CC) plant native to India. The study aimed to evaluate the inhibitory properties of this EO on mild steel in a 0.5 M HCl solution at different concentrations. Various analytical techniques, including potentiodynamic polarization curves, electrochemical impedance spectroscopy, optical microscopy, infrared spectroscopy, and proton magnetic resonance, were employed to assess the effectiveness of this EO extract. Our findings indicate that the Cuminum cyminum L (CCL) extract effectively reduces the corrosion of mild steel in hydrochloric acid with an inhibition efficiency ranging from 79.69 to 98.76%. The optimal inhibition concentration was 2 g/L of EO, and surface analysis confirmed the formation of a protective layer. Furthermore, our results suggest that the inhibitor binds to the metal surface through a charge-transfer process, creating a protective film. Finally, we utilized theoretical calculations and molecular dynamics simulations to elucidate the inhibition mechanism on both a global and local scale.

Characterizing EBV-associated Gastric Carcinoma (EBVaGC): A deep dive into LMP1 expression patterns.

Gastric cancer (GC) is a serious public health issue due to its frequency and severity. It is, for both sexes, one of the most common causes of cancer-related death and is a major contributor to the global burden of disease. Recent data show that Epstein-Barr virus (EBV) has been detected in different histopathological subtypes of gastric carcinoma and that EBV-associated gastric carcinoma (EBVaGC) represents about 10% of all cases. Moreover, the LMP1 protein characterizing the malignant transformation of cells in several cancer models seems to be very rarely expressed in this type of cancer. This study aimed to characterize EBVaGC in our population by detecting LMP1 in gastric carcinomas in about 30 selected patients. The results showed that in our population, nuclear staining predominates, showing that the antrum remains the most sampled site both for these pathologies and for LMP1 positivity (nuclear staining). In general, the LMP1 marking was negative for 22.58%, positive with a nuclear predominance at 64.52%, nuclear and cytoplasmic at 12.90%, and no positive marking for the cytoplasm. Results were not like the different studies on the expression of this oncogenic protein without EBVsCG, probably finding an explanation in the fact that our country is among the endemic regions for this herpes virus. In conclusion, the rate of LMP1 expression among gastric carcinomas does not seem similar to that observed in other countries. This study characterizing EBVaGC in Tizi-Ouzou, Algeria, reinforces the need for further studies to clarify the role of EBV (LMP1) and to explore its potential value as a predictive biomarker for the development of this type of cancer pathology.

The potential role of Epstein-Barr Virus in breast cancer development.

We are looking into viral components that may contribute to breast cancer in order to find possible therapeutic targets. The Epstein-Barr virus (EBV), which has been found to cause nasopharyngeal carcinoma and Burkitt lymphoma, is thought to play a role in breast cancer. Our series' patients had a median age of 49, with nearly half being under the age of 49. T2 tumors (two to five centimeters in size) make up the vast majority of our collection (60%). Six percent of our patients showed lymph node involvement, with roughly the same number in the N1 and N2 stages (41.17% each). Only 17.64% of people are at the N3 stage. SBR II tumors were the most common (90%). Only 20% of patients have HER2 overexpression, whereas 73.33% have ER expression. EBV was found in 23.33% of breast carcinomas (7 cases/30) after oncoprotein LMP1 expression, but normal surrounding tissues tested negative. We discovered that overexpression of the HER2 protein is inversely related to the two HRs' expression. They have no relationship with EBV infection and, consequently, LMP1 expression. LMP1 expression was not shown to be linked with patient age, tumor grade, tumor size, or lymph node invasion.

In Vitro and In Silico Activities of E. radiata and E. cinerea as an Enhancer of Antibacterial, Antioxidant, and Anti-Inflammatory Agents.

Eucalyptus, a therapeutic plant mentioned in the ancient Algerian pharmacopeia, specifically two species belonging to the Myrtaceae family, E. radiata and E. cinerea, were investigated in this study for their antibacterial, antioxidant, and anti-inflammatory properties. The study used aqueous extracts (AE) obtained from these plants, and the extraction yields were found to be different. The in vitro antibacterial activity was evaluated using a disc diffusion assay against three typical bacterial strains. The results showed that the two extracts were effective against all three strains. Both extracts displayed significant antioxidant activity compared to BHT. The anti-inflammatory impact was evaluated using a protein (BSA) inhibition denaturation test. The E. radiata extract was found to inhibit inflammation by 85% at a concentration of 250 µg/mL, significantly higher than the Aspirin. All phytoconstituents present good pharmacokinetic characteristics without toxicity except very slight toxicity of terpineol and cineol and a maximum binding energy of -7.53 kcal/mol for its anti-TyrRS activity in silico. The study suggests that the extracts and their primary phytochemicals could enhance the efficacy of antibiotics, antioxidants, and non-steroidal anti-inflammatory drugs (NSAIDs). As pharmaceutical engineering experts, we believe this research contributes to developing natural-based drugs with potential therapeutic benefits.

Identification of the Contamination Sources by PCBs Using Multivariate Analyses: The Case Study of the Annaba Bay (Algeria) Basin.

Persistent Organic Pollutants (POPs), particularly the indicator polychlorinated biphenyls (PCBs), were first quantified in water and sediments of two wadis, Boujemaâ and Seybouse, as well as in the effluents from a fertilizer and phytosanitary production industrial plant (Fertial). Since these contaminated discharges end in Annaba Bay (Algeria) in the Mediterranean Sea, with a significant level of contamination, all the potential sources should be identified. In this work, this task is conducted by a multivariate analysis. Liquid-liquid extraction and gas chromatography/mass spectrometry (GC-MS) methods were applied to quantify seven PCB congeners, usually taken as indicators of contamination. The sum of the PCB concentrations in the sediments ranged from 1 to 6.4 µg/kg dw (dry weight) and up to 0.027 µg/L in waters. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used for the multivariate analysis, indicating that the main sources of PCB emissions in the bay are urban/domestic and agricultural/industrial. The outfalls that mostly contribute to the pollution of the gulf are the Boujemaâ wadi, followed by the Seybouse wadi, and finally by the Fertial cluster and more precisely the annex basin of the plant. Although referring to a specific site of local importance, the work aims to present a procedure and a methodological analysis that can be potentially applicable to further case studies all over the world.

Quince seed mucilage/ß-cyclodextrin/Mmt-Na+-co-poly (methacrylate) based pH-sensitive polymeric carriers for controlled delivery of Capecitabine.

In current work, quince seed mucilage and ß-Cyclodextrin based pH regulated hydrogels were developed using aqueous free radical polymerization to sustain Capecitabine release patterns and to overcome its drawbacks, such as high dose frequency, short half-life, and low bioavailability. Developed networks were subjected to thermal analysis, Fourier transforms infrared spectroscopy, powder x-ray diffraction, elemental analysis, scanning electron microscopy, equilibrium swelling, and in-vitro release investigations to assess the network system's stability, complexation, morphology, and pH responsiveness. Thermally stable pH-responsive cross-linked networks were formed. Nanocomposite hydrogels were prepared by incorporating Capecitabine-containing clay into the swollen hydrogels. All the formulations exhibited equilibrium swelling ranging from 67.98 % to 92.98 % at pH 7.4. Optimum Capecitabine loading (88.17 %) was noted in the case of hydrogels, while it was 74.27 % in nanocomposite hydrogels. Excellent gel content (65.88 %-93.56 %) was noticed among developed formulations. Elemental analysis ensured the successful incorporation of Capecitabine. Nanocomposite hydrogels released 80.02 % longer than hydrogels after 30 h. NC hydrogels had higher t1/2 (10.57 h), AUC (121.52 µg.h/ml), and MRT (18.95 h) than hydrogels in oral pharmacokinetics. These findings imply that the pH-responsive carrier system may improve Capecitabine efficacy and reduce dosing frequency in cancer therapy. Toxicity profiling proved the system's safety, non-toxicity, and biocompatibility.

Suppression of Nasopharyngeal and Gastric Tumor Growth in a Mouse Model by Antibodies to Epstein-Barr Virus LMP1 Protein.

The study aimed to investigate the antitumor efficacy of anti-LMP1 antibodies in EBV-positive nasopharyngeal and stomach cell lines and xenograft models. The study also examined the NF-κB expression and cell cycle activation of NPC-serum-exosome-associated LMP1. Anti-LMP1 antibody treatment before or during cell implantation prevented tumor growth in nude mice. A small dose of antibodies resulted in complete tumor regression for at least three months after the tumors had grown in size. The consumption of antigen-antibody complexes by tumor cells limited tumor growth. In vitro experiments showed that anti-LMP1 antibodies killed EBV-positive NPC- or GC-derived epithelial cell lines and EBV-positive human B-cell lines but not EBV-negative cell lines. Treatment with anti-LMP1 reduced NF-κB expression in cells. The animal model experiments showed that anti-LMP1 inhibited and prevented NPC- or GC-derived tumor growth. The results suggest that LMP1 antibody immunotherapy could cure nasopharyngeal cancer, EBV-positive gastric carcinoma, and EBV-associated lymphomas. However, further validation of these findings is required through human clinical trials.